One way to ensure that your garage door is in good working order is to visually inspect all components regularly. This includes checking springs, cables, rollers, pulleys and tracks for any signs of wear or damage. You also need to make sure the door opener itself is working properly. If you notice any issues with any of the components, it is important to have them repaired or replaced as soon as possible to prevent further damage. Regular maintenance and inspection of your garage door will help prolong its life and ensure its proper functioning.
Instead of spending money on a garage door repairtry these simple garage door maintenance tips:
Visually inspect the garage door system
The easiest technique to determine if your garage door is having trouble is to look for signs of damage. However, if you don’t know what to look for, it can be a bit tricky.
To help you, here are some of the most common garage door component problems you can check for:
- Check the springs regularly. If you notice rust or wear on the springs, it’s time to replace them. Worn springs can also cause the door to open or close unevenly. If you have a garage door opener, the springs can also force the opener, which can shorten its life. Springs are usually under great tension, which makes them extremely dangerous. It is better to call a professional garage door spring repair from an expert rather than trying it yourself.
- Roller skates: Tracks and rollers must be in motion. The moving parts of the track are called rollers, along with the rotating shaft running through them.
- Cables: Wires should be tight and secure. Immediately remove any frayed or broken wires to prevent future damage.
- Tracks. Remove rust, stains or damage. If the rails are rusted, stained or damaged, clean them using a mild formula of mild dish detergent with warm water. Check for mud and other debris and remove if necessary.
- Bearings. Look for signs of bearing wear, damage, or bending.
- Gasket. External indicators of deterioration or damage in the gasket may be found and should be replaced.
- Cable drums. Be sure to inspect the cable drums carefully. Check for cracks or deformations in the drums.
- garage door panel. Garage door panels are made of steel, aluminum or plastic. Steel/aluminum garage doors can be dented and termite damage to wooden garage doors can occur.
If you find that any of these parts in your garage door are broken or not working properly, you can always check an online business directory, find a garage door company near you, and let a professional arrange for repair or replacement.
Test the garage door parts
Visual inspection of the garage door system can sometimes overlook a garage door problem. Therefore, testing the garage door components is another aspect of garage door maintenance that should be done.
Here are some garage door maintenance checks you can perform:
To check if your garage door is properly balanced, press the open and close buttons on your garage door opener’s remote control. If the door moves strangely, there is a problem with the springs, cables, rollers, tracks or the door opener.
- Garage door opener remote program
Program the door opener remote device with the automatic door opener before using it. After programming, check if the remote control button properly controls the garage door.
Limit switches on the garage door opener limit the distance a garage door can open or close. If you make a mistake with them, your garage door won’t fully open or close. Therefore, you should adjust the limit switches as needed to ensure your garage door operates at its best.
Auto-open garage doors are equipped with safety sensors that activate the auto-open auto-reverse mechanism. Therefore, if you put something under the garage door that prevents it from closing, it should reverse its progress.
Maintain your equipment to avoid future problems.
Inspecting and testing a garage door problem are two of the most common methods. However, you can avoid a garage door problem by performing these garage door maintenance tasks:
- Tighten loose hardware. Screws and bolts can loosen over time. Regularly check all of your garage door hardware and tighten anything that is loose. Garage door components, such as brackets, hinges, and the opener drive mechanism, can loosen over time due to vibration.
- Inspect the tracks for damage. The tracks on which the garage door runs can bend or become damaged over time. If you see any damage, use a hammer to gently push it back into place.
- Clean the sensors. The sensors that notify the garage door when something is in the way can get dirty and stop working properly. Clean them regularly with a cloth or brush to keep them working properly.
- Apply finishing treatment. It is inevitable that your garage door will suffer scratches and dents. Therefore, if the paint on the garage door panels is worn, you can refinish them. Additionally, you can use a glossy or matte finish for your wooden garage door to reduce termite infestation.
- Apply a silicone or lithium-based lubricant. Every six months, the moving components and hinges of the garage door system require silicone or lithium-based lubrication. This will reduce friction and ensure smoother movement of the garage door. If you’re unsure how to lubricate garage door components, check your owner’s manual or contact a professional.
Garage door maintenance is an important part of ensuring your garage door lasts a long time. This can help you avoid garage door repair or replacement costs. I hope you can apply the suggestions in this article to protect your garage door from damage. A well-maintained garage door with a great design can really improve the curb appeal and value of your home. So don’t wait any longer to do a good maintenance of your garage door. It is also crucial to note that the security of your home is essential, which is why you can contact a qualified and professional locksmith service if you wish to maintain the security of your property.